Setup guide

-57-
MediaEdge
2-2 Assigning ID to the MediaEdge-STB3
1
Run a Web browser and access the MediaEdge-STB3 setup page.
Ex: If MediaEdge-STB3 IP address is set to 192. 168. 0. 16
URL http://192. 168. 0. 16/
2
MediaEdge-STB3 setup page opens. Click [Local settings].
3
Enter the user name and the password.
* As the default, [admin] is set as the [User name] with no password set.
4
Select the ID at [Remote Control ID] in [System]. Press the [Save]
button once the settings are done.