Setup guide

-55-
MediaEdge
2 Setting Remote Control ID
You can assign the remote control ID numbers (0 to 3) to your MediaEdge-STB3
and remote controller. The default remote control ID is set to 0.
For example, the remote controller whose ID number is set to 2 can operate the
MediaEdge-STB3 whose ID number is 2. These settings have to be specifi ed on
each remote controller and on the MediaEdge-STB3.
2-1 Assigning ID to Remote Controller
You can assign the remote control ID numbers (0 to 3) to your remote controller. To
assign the ID number, use the numeric buttons (0 to 3) and the
button. In this
example, the procedure to assign the remote control ID to 2 is explained.
1
Press the button and the
button for at least 1
second.
Info:
No signal, such as sound or message, appears
when the ID number is changed.