Setup guide

-50-

MediaEdge

■

Firmware recovery

Recovers the ﬁ rmware.

1: To recover the ﬁ rmware, enter the following:

* Do not perform any operations until [root@POLARIS /tmp]# is displayed again.

[root@POLARIS /home]# tar zxvf maintenance.tgz

[root@POLARIS /home]# ./up

■

Restart MediaEdge-STB3

Restarts MediaEdge-STB3.

1: To restart the MediaEdge-STB3, enter the following:

[root@POLARIS /home]# reboot

■

Firmware Update

Re-update the ﬁ rmware using the standard method.