Setup guide

-48-
MediaEdge
■
Starting MediaEdge-STB3 in Maintenance Mode
With the power connected, press and hold down the reset switch. After a few
seconds, [POLARIS login:] will be displayed on the terminal program's screen.
1: Then enter as follows:
POLARIS login: root
Password: polaris
* Nothing is displayed on the screen even when you are entering the password.
2: The following text appears on the terminal program's screen:
Busybox v1.0.1(2006.04.26-10:53+0000)Built-in shell(ash)
Enter ‘help for a list of built-in commands.
[root@POLARIS /home]#
* If the user name or the password is invalid, the screen shown in STEP 1 will reappear.