Setup guide

-46-
MediaEdge
3 Updating fi rmware
3-1 How to update
■
Updates using a Web browser
(1) Copy the firmware archive file to a PC accessible by the MediaEdge-
STB3.
(2) Use a Web browser to access the MediaEdge-STB3 Setup page.
(3) Select [Firmware update] and start the update.
(4) Once the update completes, the MediaEdge-STB3 will automatically
restart.
Possible reasons for failed updates:
- The fi le is invalid.
- The version has already been applied.
(If [Disable version check] on the "Firmware Update" of the "MediaEdge-
STB3 Setup page" is checked, the firmware is updated regardless of the
current version.)
Warning:
Please do not play content or perform remote controller operations while the fi rmware
update is in progress.
Warning:
Please do not turn off the MediaEdge-STB3 while the fi rmware update is in progress.