Setup guide

-34-
MediaEdge
■
Local settings
[System]
- Remote Control ID
Specifi es the remote control ID to which the MediaEdge-STB3 responds.
Set [Disabled] to disable the remote control. See Chapter 4 "APPENDIX" for how to
specify the remote control ID on the remote controller.
- NTP server
Enables/Disables time correction utilizing the NTP server. When [Use NTP server] is
checked, specify the NTP server (server name or IP address) to be used, and the
interval of the time correction.
- Language
Specifi es the language to display on the MediaEdge-STB3.
- Remote logging
Enables/Disables remote logging. When enabled, specify the logging host (host
name or IP address).
- Information
Enables/Disables on-screen information on the menu screen.
[Network]
- IP address
Specifi es the method for acquiring an IP address and makes other detailed settings.
When [Use the following IP address] is checked, [IP address], [Subnet mask], and
[Default gateway] become available to specify.
- DNS server
Specifi es the method for acquiring a DNS server and makes other detailed settings. If
[Use the following IP address] is selected in [IP address], [Use the following DNS
server address] is automatically selected.