Setup guide

-27-
MediaEdge
2-3 Verify MediaEdge-STB3 operations
■
Verify that the menu screen appears
A few seconds after the power to the MediaEdge-STB3 is turned on, the menu
screen appears.
●
If nothing appears, follow these verifi cation steps:
1. Check that the POWER LED on the front of the MediaEdge-STB3 is lit. If
it is not lit, check the AC adapter and AC power cord connections.
2. Check the video cable connections on the back of the MediaEdge-STB3
and the TV monitor. Also, check whether the TV monitor input is switched
to the input jack to which the video cable is connected.
■
Verify that live stream sent from a LEB can be played.
Operate the remote controller of the MediaEdge-STB3, select the encode
mode set to the LEB, and press the
button. LEB starts encoding and
distributing MPEG data, making the video display on the TV monitor.
Info:
MediaEdge-STB3 does not support live stream of MPEG1/4.