Setup guide

-21-
MediaEdge
1-4 Verify MediaEdge-STB3 operations
■
Verify that the menu screen appears
The following menu screen will appear a few seconds after the startup.
●
If nothing appears, follow these verifi cation steps:
1. Check that the POWER LED on the front of the MediaEdge-STB3 is lit. If
it is not lit, check the AC adapter and AC power cord connections.
2. Check the video cable connections on the back of the MediaEdge-STB3
and the TV monitor. Also, check whether the TV monitor input is switched
to the input jack to which the video cable is connected.
■
Verify that sample content can be played
Place the cursor on [Database-referencing dynamic menu] and then press the
button. Next, place the cursor on [Sample Contents (HD)] and press the
button. Pressing the button with the cursor on specifi c content will play it.