Setup guide

-20-
MediaEdge
■
If the menu screen does not appear:
1
On the server computer, run a Web browser and open the MediaEdge-
STB3 Setup page. Enter the IP address of the MediaEdge-STB3 in
[Address]. (Ex: http://192. 168. 0. 16/)
2
Click [Local settings] to open the
parameter confi guration screen.
* To modify the Local settings, [User name]
and [Password] are required.
* At the default setting, [admin] is set as the
[user name] with no password set.
3
Make sure that [Use the following IP address] is selected in [Network],
and that proper values are displayed in [IP address], [Subnet mask],
and [Default gateway] areas.
Then select [Use the following DNS server address], enter the IP
address of the MediaEdge server (Ex: 192. 168. 0. 2) in the [Preferred
DNS server] area, keep the [Alternate DNS server] area [0.0.0.0], and
set [localdomain] to [DNS Domain name].
Also, enter the URL for the menu page in the [Home URL] fi eld in
[Video-on-demand]. [http://MEDIAEDGE-SVR/sample/stb3/index. asp]
is set as the default URL.
4
If you have changed the local settings, enter [User name] and
[Password] and then click [Save]. After changing the settings, make
sure that the menu screen is properly displayed.
* Clicking the link that says [Save Button] will jump to the [Save] button at the bottom of the
Local settings page.