Instruction manual

-6-
MediaEdge
3-2 Rear Panel
(1)
(3)
(4)
(2)
(8)
(5)
(6)
(9)
(7)
(10)
(11)
(12)(13)
(1) DVI-D
DVI-D signal output.
(2) AUDIO OUT-LEFT
Audio output (left).
(3) AUDIO OUT-RIGHT
Audio output (right).
(4) S/PDIF
Coaxial digital audio output.
(5) VIDEO OUT
Composite video signal output.
(6) S VIDEO OUT
S-video signal output.
(7) COMPONENT VIDEO OUT
Component video (Y/Pb/Pr) output.
(8) LAN
Port for connecting to Ethernet.
(9) REMOTE
Remote terminal.
(10) DIP switches
Used to enable WOL (Wake On LAN), or change the video output format (Refer
to Chapter 3 in MediaEdge-STB3 Setup Guide for details).
(11) COM
RS-232C (for pass-through) terminal.
(12) RESET
Used in emergencies. Do not use to reset.
(13) Power terminal
Connects to the accompanying AC adapter. Never connect anything here
other than the accompanying AC adapter.