Instruction manual

-5-
MediaEdge
3 MediaEdge-STB3 Parts Names
3-1 Front Panel
(1)
(2) (3)
(4) (5) (6) (7)
(1) POWER LED
Lights while MediaEdge-STB3 operates.
Unlit: Power is not on.
Lit orange: Stand-by.
Flashing orange: Wake On LAN Stand-by.
Lit green: Operating.
Flashing green: Starting up/shutting down.
(2) LINK LED
Lights when MediaEdge-STB3 is connected to a network (via a hub or other
such device).
(3) TX LED
Lights when MediaEdge-STB3 is sending data to the network.
(4) RX LED
Lights when MediaEdge-STB3 is receiving data from the network.
(5) COM LED
Lights when MediaEdge-STB3 is sending/receiving data via COM port.
(6) KEY LED
Lights when receiving a key signal from an infrared remote controller or an
external remote terminal.
(7) Infrared receiver
Built in infrared receiver for remote controllers.