Installation guide

MEDIAEDGE
98
IV-11-5. Messages related to the command schedule
The MeRdSrv service sends commands for the playback clients in accordance with the command
schedule. Log messages related to the command schedule records the command sending operations
that are performed in client group units.
info Set next command: CommandSchedule=（3）2009-12-08T15:00:00 Command=”%02PON%03” Group=（3）
STB4-Group
info Begin command execute: Group=（3）STB4-Group info Set next command: CommandSchedule=（4）
2009-12-08T15:01:00 Command=”%02PON%03” Group=（3）STB4-Group
info Begin command execute: Group=（3）STB4-Group info Set next command: CommandSchedule=（5）
2009-12-08T15:02:00 Command=”%02PON%03” Group=（3）STB4-Group
info Begin command execute: Group=（3）STB4-Group
info Set next command: CommandSchedule=None Group=（3）STB4-Group
[1] [Set next command]
=> If there is a command schedule later than the current time, records the command
schedule execution time, the command string and the target client group. If there is no command
schedule later than the current time, “None” is recorded.
[2] [Begin command execute]
=> Indicates that the command sending started for the playback clients that belong to the client group.
(On the playback client side, commands are sent to the external device using serial passthrough. Check
log messages on the playback client side. Note that the return value cannot be checked on the server.)