Installation guide

Display Content Manager Ver1.80 Installation Guide

[2] MEDIAEDGE server settings

By default MEDIAEDGE server uses the following protocol and ports. If you want to use non-default

settings, after create the following registry, please restart the MeRd-Srv service.

32bit OS

[HKEY_LOCAL_MACHINE\SOFTWARE\Canopus\DisplayContentManager\Settings\MeRdSrv]“SerialProtoc

olType”=“UDP” (or “TCP”)

HostPort=60001 (or Any port number)

ClientPort=60001 (or Any port number)

64bit OS

[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Canopus\DisplayContent-

Manager\Settings\MeRdSrv]

“SerialProtocolType”=“UDP” (or “TCP”)

HostPort=60001 (or Any port number)

ClientPort=60001 (or Any port number)

IV-8-2. Storage type playback clients settings

Set the serial mode from the Web Console in ME-DEC or HDMA. (SWT playback client does not support

the scheduled serial command.)

 Serial port function “Scheduled serial command” is selected

 Other settings Set Baud rate, Data bits, Parity, Stop bits and Flow control according to the

controlled device.