Installation guide

MEDIAEDGE
72
IV-3. FTP Server Checks
If you cannot connect to the FTP server, check the following items.
FTP server settings
[IV-13. Windows Firewall Settings]
[IV-14. IIS Installation]
[IV-15. FTP Server Settings]
DCM console settings
[IV-3-1 Settings for FTP server connection]
IV-3-1. Settings for FTP server connection
Set the information for connecting to the FTP server in the DCM console. The information set here is
stored in the database of the DCM server. For this reason, setting is only required for one computer,
even if there are multiple computers on which the DCM application is installed. Be sure to reopen the
DCM console on the computers on which the settings were not performed, in order to update them with
the setting changes.
[1] Open the DCM console.
[2] From the mene bar, open [Option] and click [FTP Server].
=> [FTP Server list] opens.
[3] Select an FTP server and click [Edit].
=> [FTP Server Settings] opens.
[4] Enter access informations and click [Connection test]. After test has passed, click [OK].
* If you want to do [Connection text] only, click [Cancel] after confirmation.
Name
Computer name of the FTP server (DCM)
IP Address
IP address of the FTP server (DCM)
If you omit [IP Address], which is accessed by using [Name]
Upload Directory
Directory name of the FTP server (folder name = DCM)
Account
An account on the FTP server (MeDcmUser)
Password
The password for the account (default button)
* IP Address is needed when DNS registration of the computer name is not
carried out. ME-DEC, HDMA cannot access it even if Windows can access it.
Please be careful.