Installation guide

Display Content Manager Ver1.80 Installation Guide

[9] Close [Services].

IV-2-2. Settings for database connection

Set the database connection information in the DCM configuration tool. The information set here is

stored on the computer on which the configuration is performed. For this reason, the settings must be

changed on all computers on which the DCM application is installed, such as the operation PC and DCM

server.

[1] From the [Start] menu, select [All Programs]->[MEDIAEDGE]>[DisplayContentManager], and click

[DCM Configuration Tool].

=> [DCM Configuration Tool] opens.

[2] Enter [Computer name], [Instance name], [Port] and [Authentication], and then click [Connection

Verification].

=> Please verify that the “Connection succeeded.” message is displayed.

# Enter the computer name of the DCM server as the computer name. In a network environment

that does not have a DNS server and cannot perform name resolution, enter the IP address of the

DCM server.

# Enter the name of the SQL Server instance as the instance name. Keep blank if the default

instance (MSSQLSERVER) is being used.

# Typically, enter 1433 for the port. If a value other than 1433 is set at [4-2-1. TCP/ IP settings fot

SQL Server], enter the value specified.

# Choose either Windows authentication or SQL authentication. For authentication SQL, please

enter your user name password.