Installation guide

MEDIAEDGE
54
II-6-4. Change the DcmOperator’s password
[1] From the [Start] menu, select [All Programs]->[MEDIAEDGE]->[DisplayContentManager], and click
[Database Configuration Tool].
=> [Database Configuration Tool] opens.
* Please run in the DCM server.
[2] Enter [Computer name], [Instance name], [Port number], [Catalog name], [User name] and [Password],
then click [Connection Verification].
# Computer name : the computer name of the DCM server or IP address
# Instance name : the instance name of the database(sets blank to specify default instance).
# Catalog name : enter “CANOPUSDCM_DB”
# Port number : enter port number of the instance. (typically 1433 is used.)
# User name : enter “DcmOperator”
# Password : enter current password of SQL “DcmOperator” (*)
=> [Connection succeeded] message, [New Password] and [confirmation] input boxes, and [Change
Password] button appear.
* Has been set to “7ujM6yhN” at installation as default.
[3] Enter [New password], [confirmation], then click [Change password].
=> [Change password succeeded] appears.
[4] Change the database connection according to following:
[IV-2-2. Settings for database connection]