Installation guide

Display Content Manager Ver1.80 Installation Guide
53
II-6-3. Change the MeOperator’s password (DCM add-on for SVS)
[1] From the [Start] menu, open [Control Panel] and click [System and Security] and then click
[Administrative Tools]. Next, double-click [Computer Management].
=> [Computer Management] opens.
* Please run in the MEDIAEDGE server.
* If there is more than one MEDIAEDGE server, please perform the steps [1] to [8] for each
MEDIAEDGE server.
* The above illustration is in the case of Windows Server 2008 R2. For the other OSes, please open
the [Computer Management] in the same procedure.
[2] From the tree, display [Computer Management (Local)]->[System Tools]->[Local Users and Groups]-
>[Users].
[3] Right-click [MeOperator] and click [Set Password...].
[4] Click [Proceed].
[5] Enter [New password] and [Confirm password], then click [OK].
[6] From the [Start] menu, select [All Programs]->[MEDIAEDGE]->[DisplayContentManager], and click
[DCMConsole], then click [Target] from the navigation bar.
=> [Target] screen of [DCM Console] opens.
* Please run at an arbitrary operation PC with [DCM Application] has been installed.
* Please follow the procedure only once even if there is more than one operation PC.
[7] From the subtree of [ME-SVS server], select the [MEDIAEDGE server] which the password was
changed. Then, enter [Account] and [Password] at property window in right-pane.
# Account : MeOperator
# Password : the password which was set at [5].
[8] From the menu, select [View] and click [Refresh], then confirm that the MEDIAEDGE server’s [Status]
becomes [Online].