Installation guide

Display Content Manager Ver1.80 Installation Guide

II-4. MEDIAEDGE-SVS Server Installation

II-4-1. SVS4 installation

This section describes the procedure for installing MEDIAEDGE-SVS4. MEDIAEDGE-SVS is selling

separately.

About the network settings for the MEDIAEDGE server

For details on the individual settings for the MEDIAEDGE server, see the sections

such as [Chapter 2 1-3. About the settings during OS installation] and [Chapter 2 3.

Connecting to clients] in [MEDIAEDGE-SVS4 User’s Guide].

About dongle connection

If you connect the dongle before performing the installation, the dongle may not

be recognized. Connect the dongle when the prompt message appears during the

dongle driver installation.

About the installation sequence for SVS4 and SQL Server 2005 Express Edition

Although in [MEDIAEDGE-SVS4 User’s Guide], [Chapter 2 1-4. DBMS installation]

is performed before [Chapter 2 2. SVS4 installation], we recommend you use

DBMS which has been already installed, as described in this section.

If DBMS has been installed separately, the TCP/IP protocol is disabled. Change the

setting by following the steps in p.194 [IV-2 Database Checks].

[1] Insert the [MEDIAEDGE-SVS4 Installation DVD] into the DVD-ROM drive.

[2] In the DVD-ROM drive, open the [SVS] folder and double-click [Setup.exe].

[3] Click [Next].