Installation guide

Display Content Manager Ver1.80 Installation Guide

8. Click [OK]. Then, please restart the OS.

# After restarting, follow the procedure [1]-[6]

again, and then go to the procedure

9. Click [Next].

# To change the installation location, click

[Change] and select an installation location.

10. Enter the name of the DCM server computer, and

then click [Next].

# In a network environment that does not have a

DNS server and cannot perform name resolution,

enter the IP address of the DCM server.

11. Select the path that preserves content files, and

then click [Next].

# Because the content files that are registered

with the DCM console are stored in this folder,

specify a drive that has a lot of free space.

12. Select the broadcast standard for the sample

contents, and then click [Next].

# Select the broadcast standard that is used in

your region (NTSC or PAL).