Installation guide

Display Content Manager Ver1.80 Installation Guide
27
I-4-6. Configuration that delivers contents via the Internet
A configuration that delivers contents from one or more operation PCs to playback clients which are
deployed in wide area via the DCM server and the FTP server which are located in the Internet.
This configuration will be possible only if the ME-DEC or HDMA-4100 (version 2.0.0 and later) is acting
as a storage type playback client. In addition, you will need to install the DCM server on the following OS.
＊ Windows Server 2012（64bit）（Standard）
＊ Windows Server 2008 R2（64bit）SP1（Standard）
Fig. I-6 Configuration that delivers contents via the Internet
(1) Operation PC (*30)
=> Set up the operation PC by following the steps below.
[1] [II-2-2 DCM application installation]
*30 : Must be able to access the DCM server which is located in the Internet from the operation PC.
(2) DCM server (& FTP server, Web server, operation PC) (*31)
=> Set up the DCM server by following the steps below.
[1] [II-2-1 DCM server and DCM application installation] (*32)
*31 : DCM server must be located in the Internet.
*32 : Windows firewall, FTP server, Web server will be set up by the DCM installer.
(3) Storage type playback clients (*33)
=> Set up the storage type playback clients by following the steps below.
[1] IP address settings (*34)
[2] Operation mode settings (*35)
[3] [IV-6-2. Set up ME-DEC, HDMA-4100 (if deliver contents via the Internet)]
*33 : Must be able to access the DCM server which is located at the Internet from the strorage type playback clients.
*34 : Please refer to the documentation of the Storage type playback clients.
*35 : ME-DEC : Setup boot mode to channel mode. HDMA : Setup boot mode to Schedule playback.