Installation guide

Display Content Manager Ver1.80 Installation Guide

I-4-2. Configuration using a DCM server

This configuration uses one operation PC and one DCM server. The number of hardware units can be

reduced by installing the FTP server onto the same server as the DCM server.

Fig. I-2 Configuration using a DCM server

(1) Operation PC

=> Set up the operation PC by following the steps below.

[1] [II-2-2 DCM application installation]

(2) DCM server (& FTP server, operation PC)

=> Set up the DCM server by following the steps below.

[1] [II-2-1 DCM server and DCM application installation]

(3) Storage type playback clients

=> Set up the storage type playback clients by following the steps below.

[1] IP address settings (*19)

[2] Operation mode settings (*20)

*19 : Please refer to the documentation of the Storage type playback clients.

*20 : ME-DEC : Setup boot mode to channel mode. HDMA : Setup boot mode to Schedule playback.