Installation guide
MEDIAEDGE
20
I-4-1. Smallest configuration without using a server
This is the smallest configuration, using one operation PC and storage type playback clients.The number
of hardware units can be reduced by installing the FTP server and DCM server onto the same computer
as the operation PC.
Before configuring this system, first consider whether to use the system configuration in [I-4-2
Configuration using a DCM server] or [ I-4-3 Configuration using one MEDIAEDGE server].
Fig. I-1 Configuration without using a server
(1) Operation PC (& FTP server, DCM server)
=> Set up the operation PC by following the steps below.
[1] [II-2-1 DCM server and DCM application installation]
(2) Storage type playback clients
=> Set up the storage type playback clients by following the steps below.
[1] IP address settings (*17)
[2] Operation mode settings (*18)
*17 : Please refer to the documentation of the Storage type playback clients.
*18 : ME-DEC : Setup boot mode to channel mode. HDMA : Setup boot mode to Schedule playback.