Installation guide

Display Content Manager Ver1.80 Installation Guide
19
I-4. System Configuration
To configure the DCM system, the devices that perform the various roles must be installed properly.
 Number of devices required for configuring the DCM system
 Operation PC At least 1
 FTP server Only 1 (*15)
 DCM server Only 1 (*16)
 MEDIAEDGE server 0 or more
 Playback client At least 1
Examples of DCM system configurations are shown below.
*15: More can be added if required; for example, if there is insufficient storage capacity. Servers cannot be
added for purposes such as balancing the access load distribution to the FTP server or for redundancy. As
such, design a system configuration that has one server only.
*16: It is not possible to balance the access load distribution to the DCM server database or build
redundancy. To prevent data loss in the event of hardware failure, be sure to perform independent
backup of the database.