Installation guide

MEDIAEDGE
16
I-3-3. FTP server
The FTP server is used as a relay point to which content files registered on the operation PC are
uploaded, and from which the content files are then distributed to the MEDIAEDGE server or storage
type playback clients. For this reason, at least one(*12) FTP server must be installed in the DCM system.
*12: Usually, only one is required. More can be added if required, for example, if
there is insufficient storage capacity. Servers cannot be added for purposes such
as balancing the access load distribution to the FTP server or for redundancy. To
prevent data loss in the event of hardware
I-3-4. MEDIAEDGE-SVS server
The MEDIAEDGE-SVS server (selling separately) is a network video distribution server where MEDIAEDGE-
SVS4 (or MEDIAEDGE-SVS3) software is installed. By installing [ DCM add-on for SVS ] onto the
MEDIAEDGE-SVS server, you can add the feature to deliver contents from DCM system for digital signage.
You can install or not install MEDIAEDGE server(s) in the DCM system.
The operating systems that support the installation of [ DCM add-on for SVS ] are as follows.
 MEDIAEDGE-SVS4
 Windows Server 2012 (64bit) (Standard)
 Windows Server 2008 R2 (64bit) Service Pack 1 (Standard)
 Windows Server 2008 (32bit) Service Pack 2 (Standard)
 Windows Server 2003 R2 (32bit) Service Pack 2 (Standard)
For details on the system requirements for the MEDIAEDGE-SVS server, see [MEDIAEDGESVS4 User’s
Guide] or [MEDIAEDGE-SVS3 User’s Guide].