Installation guide

Display Content Manager Ver1.80 Installation Guide
101
IV-13. Windows Firewall Settings
IV-13-1. Firewall the installer set
The installer of DCM1.80 registers a firewall into a DCM server.
Name
Port
MEDIAEDGE (NTP)
UDP 123
MEDIAEDGE (SQL)
TCP 1443
MEDIAEDGE (HTTP)
TCP 80
MEDIAEDGE (HTTPS)
TCP 443
MEDIAEDGE (FTP)
Ftpsvc
The above firewall rules has been created during installation of DCM, though, unintentionally these rules
might not work correctly. When such a case, please disable a firewall temporarily to check the operation.
In this section, explains how to disable the firewall.
IV-13-2. Windows Server 2008 R2
[1] From the [Start] menu, open [Control Panel] and click [System and Security] and then click
[Administrative Tool]. Next, double-click [Windows Firewall with Advanced Security].
=> [Windows Firewall with Advanced Security] opens.
[2] Click [Windows Firewall Properties].
=> [Windows Firewall with Advanced Security on Local Computer Properties] opens.