User guide

Reference 3

Changing serial control settings and the sync unit listChanging serial control settings and the sync unit list

To change the HDMA-4000 operations to a specific command, create the following

settings file [psctl.conf] in the [serial] folder and reboot the HDMA-4000 unit.

* For a sample of [psctl.conf], see the [Serial contents] folder on the product’s CD-ROM.

- psctl.conf example

SYNC Lists the HDMA-4000Sync host name to synchronize. Required

to execute synchronized playback with multiple units.

stop_mode 0 Stops with the final image displayed.

1 Stops with a blank screen displayed.

se_mode 0 When the adrsSE command is executed, stops with the first

image displayed.

1 When the adrsSE command is executed, stops with a blank

screen displayed. (Playback will not start internally.)

* In sync mode, regardless of this setting, stops with the first image

displayed.

clrm_mode 0 Clears repeat mode with the CL command.

1 Does not clear repeat mode with the CL command.

play_sm 0 In adrsPL, does not return R until stopped.

1 Immediately returns R even in adrsPL.

po_every 0 When 0PO/1PO is the same as the current state, only returns

1 Regardless of the current state, executes the change at 0PO/

1PO.

drive_ext 0 To use a USB, NAS Drive, use the root (/) directory.

1 To use a USB, NAS Drive, use the /serial directory of the

drive.

cmdqi_ext 0 Returns the IP address to the ?I command.

1 An error occurs.

*When this setting’s value is not defined, it will be set to 0.