User guide

73
Reference 3
Serial control
Command descriptions (Pioneer LD/DVD mode)Command descriptions (Pioneer LD/DVD mode)
Note
While the Pioneer LD/DVD mode is designed to be compliant to Pioneer, its
operations are not identical to the HDMA-4000(Ver.1.1x) mode.
Supported commandsSupported commands
(arg)RJ Stops the HDD. Ignores the arguments.
SA Starts the HDD. (Playback is available without starting with this
command.)
(adrs)PL Starts playback from the current position.
With an address specified, stops at the specified position.
PA Pauses with the video displayed.
ST Pauses with the video displayed. (The same as PA)
adrs SE Pauses with the specified address displayed.
adrs SL Starts playback from a specified address.
adrs SM Sets a stop marker at a specified address.
CL Cancels auto play mode and the stop marker.
FR Uses a frame for the address mode. If the ContentFrame.idx file is
not present, this returns an error.
(See page 79 for ContentFrame.idx.)
TM Uses time for the address mode. If the ContentTime.idx file is not
present, this returns an error.
(See page 80 for ContentTime.idx.)
CH Uses a chapter for the address mode.
TI Uses a title for the address mode.
arg AU Audio settings (Supports mute only.)
0 Mute
Others Mute off
arg AD Audio settings (Supports mute only.)
arg KL Enables/Disables operations from the remote controller, etc.
0 Unlocked.
1 Locked.
2 Disables power OFF.
3 Disables operations from the front panel.
4 Disables power OFF and operations from the front panel.
5 Disables operations from the remote controller.
RM Switches to repeat mode.