User guide

Flag for seamless playback
0 --- Disables seamless playback
1 or none --- Enables seamless playback
Flag for repeat playback
0 --- Stops when content playback ends
1 --- Repeats content playback
In the default setting, the channel appearing on the next line
after the line where ";Schedule" appears will be executed as the
default channel. (This setting can be changed.)
Date Playback time Content name Volume (Left, Right)
63
Reference 2
How to create a schedule
* Volume adjustment
The HDMA-4000's volume can be changed according to the schedule. To adjust the volume,
write the volume value, such as 50,50 (meaning left volume is 50, right volume is 50) at the
end of the content name in the schedule definition block (See *2 below). The volume values
can be specified in the range 0-50. When a volume value is not specified, the current volume
setting is used. Please do not specify a value out of the setting range. In the default setting,
the volume value is specified as 50,50 (0db).
;Contents
--- Content defi nition block starts
HDMAContents0
*1 --- Content name
movie01.m2t
--- Content fi le (Needs a TAB at the top of the line)
movie02.m2t
--- Change lines for multiple fi les and write similarly.
HDMAContents1
*1
movie11.m2t
movie12.m2t
HDMAContents2 0
movie21.m2t
movie22.m2t
;Schedule
--- Schedule defi nition block starts
Channel1
--- Channel name
2005/01/23
--- Date of the schedule
12:00:00-12:10:00 0 HDMAContents0
--- Content playback schedule
12:10:00-13:00:00 1 HDMAContents1
*2
2005/01/24
00:00:00-23:59:59 1 HDMAContents0 30,30