User guide

Chapter 4

WOL (Wake On LAN)WOL (Wake On LAN)

WOL is a feature that can start the HDMA-4000 via a network when it is in a STOP

state. Shut down the HDMA-4000 with DIP switch 1 on the HDMA-4000 rear panel

set to ON, to activate the WOL (Wake on LAN) feature.

Note

If the DIP switch is changed while the HDMA-4000 is turned off, the changed

setting will not be reflected. Start the HDMA-4000 first and then shut it down

to enable the change.

Note

Do not change the settings of DIP switch 2 or DIP switch 3 on the HDMA-

4000 rear panel. These switches must remain OFF.