User guide

135
Appendix
Hardware Specifications
Remote control
Infrared wireless
remote control
Wireless remote
controller
Infrared receiver x1
Wired remote
control
Remote control
terminal
Mini-jack for remote control x1
Switched automatically by inserting
plug (Exclusive use with Infrared
wireless remote control)
Generic I/O
Serial port Format EIA-232
Connector D-SUB 9 pin (male) x1
USB port Format USB 2.0
Connector USB type A x1
Storage
Installed device 2.5 inch, 80 GB
Recording time Approximately 6 hours for HD content (25Mbps)
Suggested time for
HDD replacement
While the lifespan of an HDD varies according to its usage
environment, HDDs are devices that deteriorate over time.
When used in an environment with an ambient temperature
of 25 degrees C, problems, such as writing errors, may occur
within the first 20,000 hours of use. Running the HDD for
more than 30,000 hours will degrade the head or motor,
causing the HDD to fail. Considering the purpose of this
device, the recommended replacement time for HDDs is after
about 8,000 hours of use. (Please note that these time values
are rough indications. They do not guarantee HDD
durability.)
Specification
Voltage AC adapter Input: AC 100V - 240V (50Hz/60Hz)
Output: DC 12V 3A (max)
Unit Input: DC 12V 2.9A (max)
Temperature
condition
Operating
temperature
5 - 40 degrees C
Others
Dimensions W 215.5 x D 246.4 x H 44 mm
(Projecting parts not included)
Weight 2kg approximately
Fan 4cm×1