User guide

Reference 4
120
Starting HDMA-4000 in Maintenance ModeStarting HDMA-4000 in Maintenance Mode
With the power connected, press and hold down the reset switch. After a few
seconds, [Maintenance Mode] will be displayed on the HDMA-4000 LCD. After a
few seconds from the time [Maintenance mode] is displayed, [POLARIS login:] will
be displayed on the terminal program’s screen.
(1) Then enter as follows:
POLARIS login: root
Password: polaris
* Nothing is displayed on the screen even when you are entering the password.
(2) The following text appears on the terminal program’s screen:
Busybox v1.01(2006.04.26-10:53+0000)Built-in shell(ash)
Enter ‘help‘ for a list of built-in commands.
[root@polaris /home]#
* If the user name or the password is invalid, the screen shown in STEP 1 will reappear.