User manual

Chapter 3 - Appendix
52
1 Specifications
Video standard NTSC/PAL
* SECAM is available to input. In that case, PAL signal is output.
Digital video Format DV/DVCAM
Input/Output IEEE1394 4-pin x 1
IEEE1394 6-pin x 1
Video size 720x480 pixel (NTSC), 720x576 pixel (PAL)
Digital audio Sampling rate 32kHz 12bit 2ch
* Though the data format is in 4ch, only the two main channels can be
input, with the two sub channels muted.
48kHz 16bit 2ch
Analog video Input BNC (Composite) x 1
S-video x 1
BNC (Component x 1 set)
Output BNC (Composite) x 1
S-video x 1
BNC (Component x 1 set)
Analog audio Input(Balanced) XLR-3-31 x 2
* Input impedance 600
Input(Unbalanced) RCA pin jack (Stereo 1 line)
Output(Balanced) XLR-3-32 x 2
* Load 600 is supported.
Output(Unbalanced) RCA pin jack (Stereo 1 line)
TC input/output LTC input BNC x 1
LTC output BNC x 1
REF IN B.B input
BNC x 2 (INPUT and LOOP THROUGH, automatic 75 termination)
* Analog output is available in REF sync in DV  ANALOG mode.
Remote D-sub 9-pin (female) x 1 (RS422A)
Command converter for AV/C  RS422A
Power source External power jack DC12V, 2A
Current consumption +12V 1.7A
Operating temperature
10 to 35
Operating humidity 40% to 80% (No condensation)
Storage temperature
-20 to 60
Storage humidity 20% to 80% (No condensation)
Outside dimension (projecting parts not
included)
430mm(W) x 44mm(H) x 245mm(D)
Ready for EIA-compliant 19” half rack-mounting
Weight 2.9kg (rubber foot included. AC adapter, rack-mount bracket not
included)