Specifications

Canopus Corporation ADVC-100 Basic Instructions 3
ADVC-100 Basics
The front of the ADVC-100 contains
inputs for composite, S-Video and DV.
The DV input is a 4-pin IEEE 1394
(FireWire, i.Link) port and can do both
input and output.
Power button
To turn on the ADVC-100, make sure
the power cord is plugged into the back
of the unit and into a working electrical
outlet. Then press the Power button on
the back of the unit.
Auto (IMS) mode
The ADVC-100’s IMS (Intelligent Mode
Selector) mode can automatically
determine whether you are importing
digital or analog video, In this mode, the
unit automatically detects if there is
analog or DV input and switches to the
appropriate mode.
To enable this mode, make sure DIP
switch 6 is in the ON position. For more
information on DIP switches, see Setting
DIP switches on page 8.
Input Select button
The Input Select button on the top of
the unit lets you toggle between Digital
In and Analog In modes. A blue light
signifies which mode the ADVC-100 is
using. The Input Select button will not
work while the both status lights are
blinking.
• Analog In — Indicates that the
ADVC-100 is ready to receive analog
video.
POWER
DC IN 5V
R-AUDIO OUT-LS VIDEO OUTVIDEO INDV I/O VIDEO OUTAUDIO IN
The IMS function works with Canopus DV
Products and may not work with Apple and
OHCI devices.
DIGITAL IN ANALOG IN
STATUS
L-AUDIO-R VIDEO IN S VIDEO IN
DV I/O
INPUT SELECT
Advanceced DV Converter
ADVC-100