Specifications

Canopus Corporation ADVC-100 Using the ADVC-100 13
Using with Canopus DV
products
The ADVC-100 can be used with the
following Canopus DV products:
• EZDV
• DVRaptor
• DVRaptor-RT
Set DIP switch 6 setting to the ON
position to enable the auto input select.
See Auto (IMS) mode on page 3 for
more information.
Connecting to your Canopus
capture card
When the ADVC-100 is connected to
your Canopus capture card, you can
perform the following functions:
• DV devices can be controlled directly
from the Canopus Edit/Video
software.
• Switch the DV device to OFF to use
the analog input.
• When you playback from the hard
drive, the signal will be sent out to
the DV device and analog output.
• Switch DV device to ON to capture
from DV device to hard drive.