Specifications

12 Chapter 2 ADVC-100 Canopus Corporation
1394 hub function
Video input selector
You can connect two DV devices to the
unit and share one analog device, such as
a monitor, for output. Simply set DIP
switch 6 to the ON position to enable
auto input select. There are four possible
scenarios for this functionality.
DV device 1=play
DV device 2=stop
Signal from 1 will be sent to 2 and analog
output. Analog input will be ignored.
DV device 1=stop
DV device 2= play
Signal from 2 will be sent to 1 and analog
output. Analog input will be ignored.
DV device 1 = play
DV device 2= play
Signal will be irregular and output will be
unstable. Stop one of the DV devices.
DV device 1 = stop
DV device 2= stop
Analog signal will be sent to both DV
devices and also to analog output.
This function may not be supported with
certain DV devices.
DV Device 1
Monitor
(Analog Out)
DV Device 2
VHS/S-VHS/ß/EDß
(Analog In)