Specifications

10 Chapter 2 ADVC-100 Canopus Corporation
4-channel mixing mode
When encoding DV to analog in 32kHz
mode, the unit can be set to either:
1. Use the main audio channel
2. Mix main and sub channel at
50% each.
Setting 4-channel mixing mode
1. Set DIP switch 4 to the OFF
position.
2. Press the Input Select and Power
buttons at the same time
3. The Status light illuminates and
switches audio modes.
Color Bar output
Press the Input Select button for three
seconds to output color bars from the
analog output. Press the select button
again to resume analog output. Turning
the unit off also returns it to normal
output mode.
Macrovision detection
When Macrovision signals are detected by
the ADVC-100:
• The brightness and contrast for both
analog and DV output are lowered.
• The Status light blinks