Specifications

Canopus Corporation ADVC-100 Using the ADVC-100 9
• Video Format — toggles between
capturing NTSC and PAL video.
The ADVC-100 is set to capture
NTSC video by default.
• NTSC Setup Level — toggles
between 0 IRE (Japan NTSC) and
7.5 IRE (USA NTSC).
• Locked Audio Mode — toggles
between capturing locked audio or
unlocked audio. If you are capturing
a lot of long clips, you should leave
this switch in the OFF position to
make sure the audio stays locked to
the video.
• Audio Mode — toggles between
48kHz/16-bit 2-channel audio and
32kHz/12-bit 4-channel audio. See
Setting 4-channel mixing mode on
page 10 for more information.
• Power-on Input Mode — toggles
between Analog and Digital modes
when you first turn on the unit. If
you primarily capture analog video,
you should set this to the OFF
position so the unit is in Analog In
mode when you turn it on.
• Input Select Mode — toggles
between Manual and Auto (IMS)
mode. In Auto (IMS) mode, the unit
detects whether there is analog or
DV input. For example, if you
connect an analog camera to the
unit, it automatically switches to
Analog In mode, and the Analog In
status light illuminates.