Specifications

8 Chapter 2 ADVC-100 Canopus Corporation
Powering up the unit
To turn on the ADVC-100, press the
power button on the back of the unit.
The three lights on the front of the unit
illuminate for 5 seconds.
After that, depending on the DIP switch
(switch 5) setting, the Analog In or
Digital In lights will illuminate.
Setting DIP switches
Use the DIP switches on the bottom of
the unit to modify the ADVC-100’s
functionality. Make sure the power is
turned off before you make any changes.
By default, all of the DIP switches are in
the OFF position.
Table 1: DIP Switch Settings
No. Mode OFF ON
1Video Format NTSC PAL
2 NTSC
Setup Level
O IRE 7.5 IRE
3 Locked
Audio
Mode
Locked Unlocked
4 Audio Mode 48kHz/16-bit 32kHz/12-bit
5 Power-on
Input Mode
Analog Digital
6 Input Select
Mode
Manual Auto (IMS)