Installation & Assembly

IMPORTANT
Please read these instructions
carefully before you start to assemble this greenhouse.
Keep these instructions in a safe
place for future reference.
» Customer Service
For assistance with assembly or for
replacement parts - please log onto our website
or call our service line (number is on
the title page).
Additional information can be found
at our website: www.palramapplications.com
» Safety Advice
It is of utmost importance to
assemble all of the parts according to the directions.
Do not skip any step.
We strongly recommend using
work gloves during panels' sliding.
Always wear shoes and safety
goggles when working with extruded aluminium.
If using a step ladder or power tools
make sure that you follow the manufacturer's
safety advice.
Do not touch overhead power
cables with the aluminium profiles.
Do not attempt to assemble the
greenhouse in windy or wet conditions.
Dispose of all plastic bags. Keep
them out of reach of small children.
Keep children away from the
assembly area.
Do not lean against or push the
greenhouse during construction.
Do not position your greenhouse in
an area exposed to excessive winds.
Do not attempt to assemble this
greenhouse if you are tired, have taken drugs or
alcohol or if you are prone to dizzy
spells.
Hot items such as recently used
grills, blowtorches etc. must not be stored in the
greenhouse. Make sure there are no
hidden pipes or cables in the ground before
inserting the pegs.
This product is designed to be used
mainly as a greenhouse.
Note: You should anchor the
greenhouse directly to a solid foundation; Make sure
that there are no obstructions
between the assembly area and the final position.
» Care & Maintenance
When your greenhouse needs to be
cleaned, use a mild detergent solution and rinse
with cold clean water.
DO NOT use acetone, abrasive
cleaners or other special detergents to clean the clear panels.
» Tools & Equipment
Work gloves
Phillips head screwdriver
Adjustable Spanner /Wrench
Leveler
Tape measure
Step ladder
Scissors
Electric screwdriver ( lOmm,
7mm, Phillips)
Lubricant (Optional)
T001 - Special tool for Screws
411 and nuts 412
Before Assembly
IR Selecting a site:
- The greenhouse must be positioned and fixed on a flat
level surface.
- Choose a sunny position away from overhanging trees.
IR We strongly recommend this greenhouse to be secured
directly to a solid concrete
foundation.
IR This is a multi-part assembly best achieved by two people.
Allow at least
half a day for the assembly process.
I
Take all components & parts out of the packages. Sort the
parts and check against the
content parts list.
Parts should be laid out close at hand. Keep all small parts
(screws etc.) in a bowl so they
do not get lost.
I Please note multi-sided profiles are used in this greenhouse.
As a result some holes in
the profiles are not used during assembly.
IR Please review entire instructions before starting. Carry out
the assembly steps in exact
order.
IR The drawings in this manual are designed for 8'x
8'greenhouse + 4'Extension Kit.
Please note that content list refers only for 8x8 greenhouse.
Note: all the extension module steps are marked with a
dashed outline, should be
performed during the greenhouse assembly process.