Instructions / Assembly

SAFETY ADVICE
• • Dispose of all plastic bags safely – keep them away from children’s reach.
• • Keep children away from the assembly area.
• • When using a stepladder or power tools, make sure that you are following the manufacturer’s
safety advice.
IMPORTANT RECOMMENDATIONS
• • These instructions are compatible with Palram Canopia’s
Martinique 10x14 / 3x4.3 | 12x16 / 3.6x5
Milano 10x14 / 3x4.3
• • Please carry out the steps in the order set out in these instructions.
• • Keep these instructions in a safe place for future reference.
EN CURTAIN & NETTING SET - INFORMATION
TOOLS & EQUIPMENT
Ladder Wrench 10 mm | 13/32”
IMPORTANT ASSEMBLY STEPS
When encountering this information icon during assembly,
please refer to the relevant assembly step for important
additional comments.
In order to assemble the curtain / netting you
will need to use part #7829.
This part is supplied with the gazebo. If the
part was not inserted while the gazebo was
assembled please refer back to the Milano
/ Martinique Garden Gazebo Assembly
Instructions.
(You can download the assembly instructions
from our website: www.canopia.com)
7829
Step 3:
(Martinique 10x14 / 3x4.3) Adjust the curtain / netting to the
appropriate size, on the shorter side
Step 4:
(Milano 10x14 / 3x4.3) Adjust the curtain / netting to the
appropriate size.
Step 5:
(Martinique 12x16 / 3.6x5 / Milano 10x14 / 3x4.3) Use the
Extension Kit for the additional poles.
• • When closed, the curtain / netting has to be stretched in
order to properly maintain them.
• • When opened, the curtain / netting should be tied to the
poles with the built-in straps.
*Optional:
It is possible to thread a
curtain weight chain at the
bottom.
BEFORE ASSEMBLY
1. This curtain / netting set includes 4 parts that cover the entire gazebo.
2. Please read these instructions carefully before you start to assemble this product.
3. Some of the steps may require the assistance of a second person.
Compatible with Palram - Canopia’s