User`s guide

35
[Wireless LAN Basic Configuration]
Name Details Default Value
SSID
Set the SSID of the wireless LAN
to connect this product.
The SSID is an ID that
distinguishes a wireless LAN
network from others. For wireless
devices to communicate with each
other on a wireless network, they
must share the same SSID.
Up to 32 characters (including
hyphens (-) and underscores (_)
can be used.
WU10-xxxxxx
(xxxxxx is the
last 6 digits of
the Mac
address)
Tx Power
Set the transmit power for
connecting to a wireless LAN.
High
Network
Authentica-
tion
Select the network authentication
mode that will be used to connect
to the wireless base station
(access point). Greatest security
can be obtained by using WPA/
WPA2. For IEEE 802.11n, only
AES can be used
• Open (Open System)
Allows all access without
authentication. For encryption
mode, WEP can be used.
• Shared (Pre-Shared Key)
Uses the WEP key for encryption
and allows access only from
devices with the same WEP key.
For encryption mode, WEP can
be used.
•WPA
Uses PSK for network
authentication. For encryption
mode, TKIP/AES can be
selected. The encryption key will
be generated by communicating
with your access point using a
pre-shared key. The WEP key
setting is not used for this mode.
•WPA2
Uses PSK for network
authentication. For encryption
mode, TKIP/AES can be
selected. The encryption key will
be generated by communicating
with your access point using a
pre-shared key. The WEP key
setting is not used for this mode.
Open
Name Details Default Value