Specifications

EOS SYSTEM ACCESSORIES
51
Focusing Screens Ee SeriesFocusing Screen Sets for 4x5 and Square Formats
Focusing Screens Ec Series
Note: All focusing screens include a special tool for removing original screen and installing new screen. EOS-1Ds, EOS-1D Mark II, EOS-1D, EOS-1v HS and EOS-1v—If using New Laser Matte
Focus Screens Ec-N or Ec-R, be sure to set camera’s Custom Function C.Fn-0 to “0”. EOS-3—If using Laser Matte Ec-A, Ec-B, Ec-C II, Ec-C III, Ec-D, Ec-I or Ec-L focus screens, be sure to set camera’s
Custom Function C.Fn-0 to “1”. Exposure compensation is required when combining the focusing screen Ec-R with the EOS-1 or EOS-1n, and when combining the focusing screens Ec-A, B, Cll, D,
H, I and L with the EOS-1n RS. Refer to each focusing screen’s instructions for detailed information. † EOS-1Ds Mark III, 1D Mark III and 1D Mark II n must be set to appropriate Custom Function
for accurate exposure metering when this screen is installed. Manual exposure is required for use with other EOS-1 series cameras.
Description
Ec-A: Microprism
This matte field screen
with microprism focusing
spot in the center is used
for general photography
with all lenses.It achieves
best results when using a
lens of f/5.6 or faster
.
E
c-B: New Split
This matte field screen with
split-image focusing spot
in the center is good for
general photography with
all lenses.
Ec-C III: Laser-Matte
Standard on the EOS-1D
series, EOS-1v HS/EOS-1v,
and compatible with all EF
lenses, this screen includes
an Area AF ellipse and
spotmetering circle. Manual
focus can be checked
anywhere on the screen.
Ec-C IV
: Laser-Matte
This Laser Matte Ec-C IV
uses a shaping method
improved over the Ec-C III.
It achieves easier focusing
and good background blur
.
brighter, less grainy, and
better balanced.
Ec-D: Laser
-Matte
w
ith Sections
This is a matte field screen
with sections. Grid lines
assist in determining
accurate picture composition.
It is especially well suited
for close-up photography
or for copy work using EF
macro lenses, it can also
be used for general photog-
raphy with all lenses.
Ec-H: Laser
-Matte
with Scale
A matte field screen with
vertical and horizontal scales
marked in millimeters, this
screen is effective for
close-up photography and
photo-micrography
. Useful
in determining magnification
ratios and composition, this
screen can be used with all
l
enses.
EOS-1D Mark IV, EOS-1Ds/1D Mark III, 1Ds/1D Mark II, 1Ds/1D
Compatibility
Description
Description Description
Ec-l: Laser
-Matte with
Double Cross-Hair Reticle
Ec-1Ds/Ec-1D/Ee:
Crop Lines
Ec-1Ds/Ec-1D/Ee:
Black Mask
Ideal for the portrait and wedding photographer
, the set “Crop
Lines” includes two focus screens—one with 4x5 (or 8x10) crop
lines etched on the screen, and a second screen with lines for
square composition. All exposure metering can be performed
normally in camera, and red focus point illumination remains fully
active. The other sets “Black Mask” have and opaque black mask
outside the picture area. One screen of the set shows the area for
4x5 (or 8x10) cropping, the other shows the area for square
cropping. Partial or Spot metering is recommended for these
screens. E-TTL II flash exposure will definitely require significant
compensation. FEL (Flash Exposure Lock) in conjunction with
either partial or spot metering is recommended. 3 types are
available for both sets respectively
, according to the size of the
CMOS sensor and viewfinder optics: for full frame 1Ds series*,
1D series and for 5D.
*can also be attached to 35mm EOS-1 series and EOS-3
cameras.
Ee-A: Precision Matte
Replacement standard
focus screen exclusively for
the EOS 5D. Matte surface
with nine AF points etched
on screen. For general
photography with all lenses.
Ee-D: Precision Matte
with Grid Lines
Similar to standard Ee-A
screen for EOS 5D, but
with horizontal and vertical
lines for precise subject
placement or alignment.
Overall matte surface gives
viewing and focusing very
similar to standard Ee-A
screen. EOS 5D must be set
to Custom Function 00-1 for
accurate exposure metering.
Ee-S: Super-Precision
Matte
An all-matte focus screen
for the EOS 5D with finer
microlens structure than the
standard screens.
Out-of-focus areas show
more vividly than with
Ee-A and Ee-D screens.
It works best with lenses
from f/1.8 to f/2.8 max
aperture, especially for
manual focusing. EOS 5D
must be set to Custom
Function 00-2 for accurate
exposure metering.
Ec-L: Cross-Split Image
This matte field screen has
a cross-split image in the
center, which divides the
subject in half both vertically
and horizontally for accurate
manual focusing. Used for
general photography with
all lenses, best results are
obtained when using a lens
of f/5.6 or faster
.
This is a matte field screen
with a clear center spot
containing a double cross-
hair reticule. Focusing is
possible using the floating
image of the central cross
hair. This screen is particu-
larly useful for photomi-
crography and astrophotog-
raphy. Surrounding matte
field can be used with all
lenses
.
Ec-N: New Laser-Matte
This is the standard screen
for the EOS-3. The outer
oval-shape the 45 AF points;
the inner circle is for spot
and FEL metering. When
shooting, the focusing points
will be indicated in red LCD
markings. Along with the
Ec-R screen, it is
approximately 1/2 stop
brighter than the Laser-
Matte series screens.
Ec-R: New Laser-Matte
This is the standard screen
provided with the EOS-1n
RS. It compensates for
decreased viewfinder
brightness due to the low
reflection factor of the
pellicle mirror
. It is about
1/2-stop brighter but
otherwise similar to
Focusing Screen Ec-CII.
It can be used in all EOS-1
series cameras, as well as
the EOS-3.
Ec-S: Super Precision
Matte
†
An all-matte focus screen
for the EOS-1D Mark II n
with finer microlens
structure than the standard
screens. Out-of-focus areas
show more vividly than with
the other Ec type screens.
Ideal for fast lenses (f/1.8
through f/2.8 max aperture).
EOS 5D
Compatibility
All models of EOS-1Ds and EOS-1D, EOS D2000, EOS-1v, 1n, 1n RS, EOS-1 and EOS-3
Compatibility
All models of EOS-1Ds and EOS-1D, EOS D2000, EOS-1v, 1n, 1n RS, EOS-1 and EOS-3
Compatibility
EF 180mm f/3.5L Macro USM •f/4.5 •1/200 sec.
50
For more customization, many of Canon’s EOS cameras are compatible
with a vast choice of eyecups, diopter lenses and more for greater
versatility in a number of shooting situations.
Shooting Accessories
Compatibility
Description
Eyecups, Rubber Frames and Dioptric Adjustment Lenses
Anti-Fog
Eyepiece Ec
1Ds Mark II,
1Ds, 1D Mark
II n, 1D Mark
II, 1D, D2000,
1v HS, 1v
, 1n
RS, 1n, 1
A
nti-Fog
Eyepiece Ed
EOS-3,
A2/A2e,
ELAN 7 series,
ELAN II/IIe
Dioptric
Adjustment
Lens E
All EOS SLR
cameras except:
EOS Mark III
series, EOS-3,
A2/A2e, ELAN
7 series, ELAN
II/IIe, IX, IX Lite
Dioptric
Adjustment
Lens Ed
EOS-3,
A2/A2e,
ELAN 7 series,
ELAN II/IIe
Dioptric
Adjustment
Lens Eg
EOS-1D Mark IV,
1Ds Mark III,
1D Mark III,
EOS 7D
Eyepiece Extender
EP-EX15
All EOS SLR
cameras except:
1Ds Mark III, 1D
Mark III, 5D Mark II,
50D, 40D, EOS-3,
A2/A2e, ELAN 7 series,
ELAN II/IIe, IX, IX Lite
Eyepiece Extender
EP-EX15 II
5D Mark II,
50D, 40D,
EOS Rebel T2i,T1i,
Rebel XSi,
Rebel XS
Angle Finder C
All EOS SLR
cameras (Includes
Adapter Ec-C and
Ed-C to fit any EOS
camera.)
These eyecups use specially
treated advanced-process glass,
which helps to prevent conden-
sation, or fogging. The eyecups
are useful in warm, humid and
cold weather, when fogging is
most likely to occur.
Note: EOS-1Ds Mark III, EOS-1D Mark III and
EOS 7D use Anti-fog Eyepiece Eg only
.
These Dioptric Adjustment lenses provide
near- and far-sighted users a clear viewfinder image
without the use of eyeglasses. Available in versions
from +3 to -4 dpt to match many types of eyesight,
each Dioptric Adjustment Lens fits into the eyepiece
holders of the appropriate EOS model for conven-
ient use and a comfortable fit.
Note: EOS-1Ds Mark III and EOS-1D Mark III require Dioptric
Adjustment Lens Eg only.
Extends the eyepiece 5/8" (15mm) from the
camera body and reduces viewfinder
magnification by 30%. Useful for eyeglass
wearers and others to keep the tip of the
nose from touching the camera body.
Angle Finder C lets
users adjust the
viewing angle while
providing a 2.5x
magnification for
critical focusing, or
a full-screen image
(1.25x) that includes
exposure data.
Provided with built-in
dioptric adjustment
for variations in
eyesight.
Eyecup Eb
EOS ELAN, Rebel
series**, 700, 750,
850, 5D Mark II, 5D,
50D, 40D, 30D,
20D, 20Da, 10D,
D60, D30
Eyecup Ec-II
EOS-1D Mark III,
1Ds Mark II, 1Ds,
1D Mark II n,1D
Mark II, 1D, D2000,
1v HS, 1v
, 1n RS, 1n, 1
Eyecup Ed
EOS-3, A2/A2e,
ELAN 7 series,
ELAN II/IIe
Eyecup Ef
EOS Rebel T2i,T1i,
Rebel XSi/XS,
Digital Rebel XTi/XT
,
EOS Digital Rebel,
Rebel T2, T
i, K2
Eyecup Eg
EOS-1D Mark IV,
EOS-1Ds Mark III,
1D Mark III,
EOS 7D
Rubber Frame Ec*
EOS-1Ds Mark II,
1Ds, 1D Mark II n,
1D Mark II, 1D,
D2000, 1v HS, 1v
,
1n RS, 1n, 1
Rubber Frame Ef*
EOS Rebel T2i,T1i,
Rebel XSi, XS,
Digital Rebel, Rebel
T2, T
i, K2, Required
for use of Dioptric
Adjustment Lens E
Rubber Frame Eb*
EOS 10S, ELAN, 5D
mark II, 5D, 50D,
40D, 30D, 20D,
20Da, 10D, D60,
D30, Rebel series**
Compatibility
Focusing Screens Eg Series
Description
Eg-A:
Standard focus screen
exclusively for the EOS
5D Mark II. Matte
surface with nine AF
points etched on screen.
For general photography
with all lenses.
Eg-D:
Similar to standard
Eg-A screen for EOS 5D
Mark II, but with
horizontal and vertical
lines for precise
subject placement or
alignment. EOS 5D
must be set to Custom
Function IV
-5-1 for
accurate exposure
metering.
Eg-S:
An all-matte focus
screen for the EOS 5D
Mark II with finer
microlens structure than
the standard screens.
Out-of-focus areas show
more vividly than with
EG-A and EG-D screens.
EOS 5D Mark II must be
set to Custom Function
IV
-5-2 for accurate
exposure metering.
Focusing Screens Ef Series
Description
Ef-A:
The standard focus
screen for EOS 40D.
Standard Precision
Matte sur
face, ideal with
most lenses including
zooms f/3.5 thru f/5.6.
All matte surface.
Includes a special tool
to remove existing
screen.
Ef-D:
Precision Matte
surface, with etched
grid lines to assist
composition. The EOS
40D's AF points remain
fully visible. Focus
characteristics suited to
most lenses.
Ef-S:
Exclusively for the EOS
40D, this focus screen is
optimized for wide-aperture
lenses from f/1.8 to f/2.8.
Areas that are slightly out
of focus appear more out
of focus, making it easier
to tell when focus is right-
o
n. Ideal for users who fre-
quently manually-focus in
dim light with fast lenses.
Compatibility EOS 50D, 40D EOS 50D, 40D EOS 50D, 40DCompatibility EOS 5D Mark II
Eyecup Ed-E
EOS-3, A2/A2e,
ELAN 7 series,
ELAN II/IIe
This large eyecup
keeps out most
sunlight and other
external light,
substantially
enhancing viewfinder
visibility. It is espe-
cially helpful for
eyeglass wearers
when photographing
outdoors. The mount
can be rotated for
vertical shots.
* Used with Dioptric Adjustment Lens E. ** Except Digital Rebel, Rebel T2, Ti and Rebel K2