Specifications

usa.canon.com/eos
71
EOS SYSTEM ACCESSORIES
70
EF 180mm f/3.5L Macro USM •f/4.5 •1/200 sec.
Viewfinder Accessories
For more customization, many of Canon’s EOS cameras are compatible
with a vast choice of eyecups, diopter lenses and more for greater
versatility in a number of shooting situations.
Anti-Fog
Eyepiece Ec
Anti-Fog
Eyepiece Ed
Dioptric Adjustment
Lens E
Dioptric Adjustment
Lens Ed
Dioptric Adjustment
Lens Eg
Eyepiece Extender
EP-EX15 II
Eyepiece Extender
EP-EX15 Angle Finder C Eyecup Ed-E
Compatibility
EOS-1Ds Mark II,
1Ds, 1D Mark II N,
1D Mark II, 1D,
D2000, 1v HS, 1v, 1N
RS, 1N, 1
EOS-3, A2/A2e,
ELAN 7 series,
ELAN II/IIe
All EOS SLR cameras
except: EOS Mark III
series, EOS-3, A2/A2e,
ELAN 7 series,
ELAN II/IIe, IX, IX Lite
EOS-3, A2/A2e,
ELAN 7 series,
ELAN II/IIe
EOS-1D X, 1D Mark IV,
1Ds Mark III,
1D Mark III,
5D Mark III, 7D
EOS 5D Mark II, 70D
60D, 60Da, 50D, 40D,
Rebel T5i, T4i, SL1,
T3i, T2i, T3, T1i, XSi,
XS
All EOS SLR cameras
except: 1Ds Mark III,
1D Mark III, 6D,
5D Mark II, 60D, 60Da,
50D, 40D, EOS-3, A2/
A2e, ELAN 7 series,
ELAN II/IIe, IX, IX Lite
All EOS SLR cameras
(Includes Adapter
Ec-C and Ed-C to fit
any EOS camera.)
EOS-3, A2/A2e,
ELAN 7 series,
ELAN II/IIe
Description
These eyecups use specially treated
advanced-process glass, which helps to
prevent condensation, or fogging. The
eyecups are useful in warm, humid and cold
weather, when fogging is most likely to occur.
Note: EOS-1Ds Mark III, EOS-1D Mark III and EOS 7D use
Anti-fog Eyepiece Eg only.
These Dioptric Adjustment lenses provide near- and far-sighted
users a clear viewfinder image without the use of eyeglasses.
Available in versions from +3 to -4 dpt to match many types of
eyesight, each Dioptric Adjustment Lens fits into the eyepiece
holders of the appropriate EOS model for convenient use and a
comfortable fit.
Note: EOS-1Ds Mark III and EOS-1D Mark III require Dioptric Adjustment Lens Eg only.
Extends the eyepiece 5/8" (15mm) from the
camera body and reduces viewfinder
magnification by 30%. Useful for eyeglass
wearers and others to keep the tip of the nose
from touching the camera body.
Angle Finder C lets
users adjust the
viewing angle while
providing a 2.5x
magnification for
critical focusing, or
a full-screen image
(1.25x) that includes
exposure data.
Provided with built-in
dioptric adjustment
for variations in
eyesight.
This large eyecup
keeps out most
sunlight and other
external light, sub-
stantially enhancing
viewfinder visibility.
It is especially helpful
for eyeglass wearers
when photographing
outdoors. The mount
can be rotated for
vertical shots.
Eyecup Eb Eyecup Ec-II Eyecup Ed Eyecup Ef Eyecup Eg Rubber Frame Eb* Rubber Frame Ec* Rubber Frame Ef*
Compatibility
EOS ELAN, Rebel series**,
700, 750, 850, 6D, 5D
Mark II, 5D, 70D, 60D,
60Da, 50D, 40D, 30D,
20D, 20Da, 10D, D60,
D30
EOS-1D Mark III,
1Ds Mark II, 1Ds,
1D Mark II N,1D Mark II,
1D, D2000, 1v HS, 1v,
1N RS, 1N, 1
EOS-3, A2/A2e,
ELAN 7 series,
ELAN II/IIe
EOS Rebel T5i, T4i, SL1,
T3i, T2i, T3, T1i, XSi/XS,
Digital Rebel XTi/XT,
EOS Digital Rebel,
Rebel T2, Ti, K2
EOS-1D X, 1D Mark IV,
1Ds Mark III, 1D Mark III,
5D Mark III, 7D
EOS 10S, ELAN, 6D
5D Mark II, 5D, 60D,
60Da,50D, 40D, 30D,
20D, 20Da, 10D, D60,
D30, Rebel series**
EOS-1Ds Mark II, 1Ds,
1D Mark II N, 1D Mark II,
1D, D2000, 1v HS, 1v,
1N RS, 1N, 1
EOS Rebel T5i, T4i, SL1,
T3i, T2i, T3, T1i, XSi, XS,
Digital Rebel, Rebel T2,
Ti, K2; Required for use of
Dioptric Adjustment Lens E.
Eyecups, Rubber Frames and Dioptric Adjustment Lenses
Focusing Screens Eg Series
Focusing Screen Sets for 4x5 and Square Formats Focusing Screens Ee Series
Focusing Screens Ef Series
* Used with Dioptric Adjustment Lens E. ** Except Digital Rebel, Rebel T2, Ti and Rebel K2
Eg-A II: Eg-A: Eg-D: Eg-S: Ef-A: Ef-D: Ef-S:
Compatibility
EOS 6D EOS 5D Mark II EOS 6D, 5D Mark II EOS 60D, 60Da, 50D, 40D
Description
Standard focus screen
exclusively for the EOS 6D.
Bright and easy to
distinguish focus. For
general photography with
all lenses.
Standard focus screen
exclusively for the
EOS 5D Mark II. Matte
surface with nine AF points
etched on screen. For
general photography with
all lenses.
Similar to standard Eg-A
screen for EOS 5D Mark II,
but with horizontal and
vertical lines for precise sub-
ject placement or alignment.
EOS 5D must be set to
Custom Function IV-5-1 for
accurate exposure metering.
An all-matte focus screen for
the EOS 5D Mark II with finer
microlens structure than the
standard screens.
Out-of-focus areas show
more vividly than with EG-A
and EG-D screens.
EOS 5D Mark II must be set
to Custom FunctionIV-5-2 for
accurate exposure metering.
The standard focus screen
for EOS 40D. Standard
Precision Matte surface,
ideal with most lenses
including zooms f/3.5 thru
f/5.6. All matte surface.
Includes a special tool to
remove existing screen.
Precision Matte surface,
with etched grid lines to
assist composition.
The EOS 40D’s AF points
remain fully visible. Focus
characteristics suited to
most lenses.
Exclusively for the EOS 40D,
this focus screen is optimized
for wide-aperture lenses
from f/1.8 to f/2.8. Areas
that are slightly out of focus
appear more out of focus,
making it easier to tell when
focus is right-on. Ideal
for users who frequently
manually-focus in dim light
with fast lenses.
Ec-1Ds/Ec-1D/Ee: Crop Lines Ec-1Ds/Ec-1D/Ee: Black Mask Ee-A: Precision Matte
Ee-D: Precision Matte
with Grid Lines Ee-S: Super-Precision Matte
Compatibility
EOS-1D X
††
, 1D Mark IV, 1Ds/1D Mark III, 1Ds/1D Mark II, 1Ds/1D 5D
Description
Ideal for the portrait and wedding photographer, the set “Crop Lines” includes
two focus screens—one with 4x5 (or 8x10) crop lines etched on the screen, and a
second screen with lines for square composition. All exposure metering can be
performed normally in camera, and red focus point illumination remains fully
active. The other sets “Black Mask” have and opaque black mask outside the
picture area. One screen of the set shows the area for 4x5 (or 8x10) cropping, the
other shows the area for square cropping. Partial or Spot metering is recommended
for these screens. E-TTL II flash exposure will definitely require significant
compensation. FEL (Flash Exposure Lock) in conjunction with either partial or spot
metering is recommended. 3 types are available for both sets respectively,
according to the size of the CMOS sensor and viewfinder optics: for full frame 1Ds
series*, 1D series and for 5D.
* Can also be attached to 35mm EOS-1 series and EOS-3 cameras.
Replacement standard focus screen
exclusively for the EOS 5D. Matte surface
with nine AF points etched on screen. For
general photography with all lenses.
Similar to standard Ee-A screen for EOS
5D, but with horizontal and vertical
lines for precise subject placement or
alignment. Overall matte surface gives
viewing and focusing very similar to
standard Ee-A screen. EOS 5D must be
set to Custom Function 00-1 for accurate
exposure metering.
An all-matte focus screen for the EOS
5D with finer microlens structure than
the standard screens. Out-of-focus
areas show more vividly than with Ee-A
and Ee-D screens. It works best with
lenses from f/1.8 to f/2.8 max aperture,
especially for manual focusing. EOS 5D
must be set to Custom Function 00-2 for
accurate exposure metering.
Ec-A: Microprism Ec-B: New Split Ec-C III: Laser-Matte Ec-C IV: Laser-Matte Ec-D: Laser-Matte with Sections
Compatibility
EOS-1D X
††
, All models of EOS-1Ds and EOS-1D, EOS D2000, EOS-1v, 1N, 1N RS, EOS-1 and EOS-3
Description
This matte field screen with microprism
focusing spot in the center is used for
general photography with all lenses.It
achieves best results when using a lens
of f/5.6 or faster.
This matte field screen with split-image
focusing spot in the center is good for
general photography with all lenses.
Standard on the EOS-1D series,
EOS-1v HS/EOS-1v, and compatible with
all EF lenses, this screen includes an
Area AF ellipse and spot metering circle.
Manual focus can be checked anywhere
on the screen.
This Laser Matte Ec-C IV uses a shaping
method improved over the Ec-C III. It
achieves easier focusing and good
background blur. brighter, less grainy,
and better balanced.
This is a matte field screen with sections.
Grid lines assist in determining accurate
picture composition. It is especially well
suited for close-up photography or for
copy work using EF macro lenses, it can
also be used for general photography
with all lenses.
Ec-H: Laser-Matte with Scale
Ec-l: Laser-Matte with
Double Cross-Hair Reticle Ec-L: Cross-Split Image Ec-N: New Laser-Matte Ec-R: New Laser-Matte Ec-S: Super Precision Matte†
Compatibility
EOS-1D X
††
, All models of EOS-1Ds and EOS-1D, EOS D2000, EOS-1v, 1N, 1N RS, EOS-1 and EOS-3
Description
A matte field screen with vertical
and horizontal scales marked in
millimeters, this screen is
effective for close-up photography
and photo-micrography. Useful
in determining magnification
ratios and composition, this
screen can be used with all lenses.
This is a matte field screen with
a clear center spot containing
a double cross-hair reticule.
Focusing is possible using the
floating image of the central cross
hair. This screen is particularly
useful for photomicrography and
astrophotography. Surrounding
matte field can be used with all
lenses.
This matte field screen has a
cross-split image in the center,
which divides the subject in half
both vertically and horizontally for
accurate manual focusing. Used
for general photography with all
lenses, best results are obtained
when using a lens of f/5.6 or
faster.
This is the standard screen for the
EOS-3. The outer oval-shape the
45 AF points; the inner circle is
for spot and FEL metering. When
shooting, the focusing points will
be indicated in red LCD markings.
Along with the Ec-R screen, it is
approximately 1/2 stop brighter
than the Laser- Matte series
screens.
This is the standard screen
provided with the EOS-1N RS.
It compensates for decreased
viewfinder brightness due to the
low reflection factor of the
pellicle mirror. It is about 1/2-stop
brighter but otherwise similar to
Focusing Screen Ec-CII. It can be
used in all EOS-1 series cameras,
as well as the EOS-3.
An all-matte focus screen for
the EOS-1D Mark II N with finer
microlens structure than the
standard screens. Out-of-focus
areas show more vividly than with
the other Ec type screens. Ideal
for fast lenses (f/1.8 through f/2.8
max aperture).
Focusing Screens Ec Series
Note: All focusing screens include a special tool for removing original screen and installing new screen. EOS-1Ds, EOS-1D Mark II, EOS-1D, EOS-1v HS and EOS-1v—If using New Laser Matte Focus Screens Ec-N or
Ec-R, be sure to set camera’s Custom Function C.Fn-0 to “0”. EOS-3—If using Laser Matte Ec-A, Ec-B, Ec-C II, Ec-C III, Ec-D, Ec-I or Ec-L focus screens, be sure to set camera’s Custom Function C.Fn-0 to “1”. Exposure
compensation is required when combining the focusing screen Ec-R with the EOS-1 or EOS-1N, and when combining the focusing screens Ec-A, B, Cll, D, H, I and L with the EOS-1 N RS. Refer to each focusing screen’s
instructions for detailed information. † EOS-1Ds Mark III, 1D Mark III and 1D Mark II N must be set to appropriate Custom Function for accurate exposure metering when this screen is installed. Manual exposure is
required for use with other EOS-1 series cameras. †† For the EOS-1D X, by changing the Focusing Screen Custom Function setting, the camera can be compatible with the Laser Matte focusing screens: Ec-A, B, D, H, I,
and L. The Ec-C IV and Ec-C, CII, CIII, S, N, and R focusing screens can also be installed, but since there is no Focusing Screen Custom Function setting for them, you must set exposure compensation as you shoot.