WFT-E7 Instruction Manual

60
Remote Capture [Camera control]
2
Set the lens focus mode switch to
<f>.
Click the release button (⑤). When you let go of
the button, the camera autofocuses and the
picture is taken.
With One-Shot AF, the picture is not taken if focus
is not achieved. Display the Live View image and
focus manually as described in the next steps.
3
Display the Live View image.
Click the Live View shooting button (⑯).
X The AF/MF switch (⑥) is set to <g>, and the
Live View image is displayed.
If the Live View image is not displayed, enable
Live View shooting in the menu (⑮).
To make the Live View image display more
responsive, click the Live View image size
switching button (⑱). The Live View image will be
displayed at a smaller size, improving
responsiveness. To restore the original size, click
the button again.
4
Manually adjust the focus.
Click the buttons < >, < >, < >, < >,
< >, and < > to adjust the focus. Note that
autofocus is not supported during the Live View
image display.
To focus more closely, click < >, < >, or
< >. To focus farther away, click < >,
< >, or < >.
Three levels of focus adjustment are available.
< > < > : Largest increment
< > < > : Intermediate increment
< > < > : Smallest increment
⑯
⑱
COPY