Specifications

Authored by Simon Adams Product Support Specialist Canon UK RCC December 05
Revision 1.2 © Canon 2006
47
On the Computer Name tab of My Computer Properties the SSID setting on the WFT-E1A should be set
to the exact setting defined under Full computer name, in this case hpdesktop. Make sure your PC’s full
computer name has no spaces and consists of alphanumeric characters only, as errors can be caused if
this is not the case. If necessary you may need to change the full computer name if it has spaces or has
non alphanumeric characters, this can be carried out from the “change” button, and a restart is
necessary for any changes to be registered.
Lastly you will need to load the settings file into your camera. Insert the CF card containing the .NIF file
and load the settings into your camera as detailed on page 23-25 of the WFT-E1A manual.
The orange link light should blink a few times, disappear, then remain steady and the display should
show the connected speed as in the picture below.