User`s manual

148
Message
Problem
Solution
Stopped browsing log, because there were lot of wrong lines.
Processing for access log viewing was cancelled because the log file format is incorrect
(has too many lines).
The log file is an older version or the log file contains an error. Back up the log file for
safety and then delete it.
The log file is stored under C:\Program Files\Canon\WebView\Sys\log.
Message
Problem
Solution
There is no access in specified period.
This message is displayed if a period is specified during which the log was not accessed.
This is not an error.
Select a period during which the log file was accessed.
Message
Problem
Solution
There is no log data for analysis.
There are no log files to be analyzed.
Open the "Log" dialog box in "Setup Server Configuration" in the WebView Livescope
manager and tick the "Enable loggings" checkbox.
Message
Problem
Solution
Password incorrect.
The password was incorrect.
Check the password and enter the correct password.
Message
Problem
Solution
Could not make Csv file.
When you select CSV as the output file format, a temporary file is created for CSV
transmission. However, the temporary file could not be created.
Check that there is sufficient free disk space and then restart your machine.
Message
Problem
Solution
Could not reserve the basic resource for OS such as Memory. The status of the server
machine is abnormal.
Basic system resources (RAM, etc.) could not be acquired due to an error on the server
machine.
Try to reboot the machine. If the problem is not resolved when the machine is rebooted,
check that an error has not been listed in the event log and take appropriate action.
Access Log Analysis Messages