User`s manual

140
Message
Problem
Solution
WebView Livescope Http Server delected a fatal error. Restarting httpserve.exe.
A problem occurred on the WebView Livescope HTTP server.
The server is automatically restarted. However, if problems with the camera server
persist for some time in subsequent operation, restart the machine.
Message
Problem
Solution
VC-C3 is off line.
The VC-C3 camera connection cannot be set up correctly.
Check that the camera is switched on. Alternatively, check the RS cable connections on
both the PC and the camera.
Message
Problem
Solution
Check sum error.
The RS cable is not correctly connected to the VC-C3 camera.
Check that the RS cable is connected correctly.
Message
Problem
Solution
Pan-tilter is offline. Check cables, turn off the power and then turn on the main power
switch.
Part of the VC-C4 camera is switched off or is disconnected.
Check that the camera is switched on. Alternatively, check the RS cable connections on
both the PC and the camera.
5. HTTP Conversion Server-specific Event Log Messages
Message
Problem
Solution
VC-C4 is off line.
The VC-C4 or VC-C4R camera is not connected properly.
Check that the camera is On. Check the PC and the camera to see if the RS cable is
connected. For cascade connections in particular, it is necessary to check the power and
cables of other cameras.
Message
Problem
Solution
The VC-C4 does not respond.
There is no response from the VC-C4 or VC-C4R camera.
Check the camera power and the RS cable.
Message
Problem
Solution
The installation type setting of VC-C4 is incorrect.
The settings for VC-C4 and VC-C4R cameras have been mixed up.
Check the camera type and follow the instructions in "Changing the Camera Settings"
(P.41) to change the camera settings.