User`s manual

Installation Procedure

Before you begin the installation

If there is web server software already installed on the PC to be used for installation,

you must avoid conflicting the port number of WebView Livescope HTTP server and

web server. To ensure that the WebView Livescope HTTP server can penetrate

firewalls, it is installed with a default port number of 80. To ensure that the web

server and HTTP server do not both use port number 80, you should change the web

server port number to a number such as 8080. A precondition of this is that you use

the WWW server function (see P.53).

Starting the Installer

When you load the WebView Livescope Ver. 3.10 Installer CD-ROM into your machine, the

Installer's main screen automatically launches. If it fails to launch, double-click

"wvsetup.exe" on the CD-ROM drive using Windows Explorer.

Click the buttons in the main screen to start up the installer and install the software.

You must log in with the user name (Administrator, etc.) that has Administrator privileges

before installing the servers and the manager.

● Install Servers

This option installs the "WebView Server", "WebView Manager" and "WebView Viewer". These

servers are used to set up the camera server.

* Install this software on Windows NT 4.0 (SP5 or later). (Note) IE 4.0 or later is required.

● Install Manager

This option installs the "WebView Manager" and "WebView Viewer". These programs are used

by the camera server manager to control the server remotely.

* Install this software on Windows 95/98, NT 4.0 or Windows 2000. (Note) IE 4.0 or later is required.

● Install Viewer

This option installs the "WebView Viewer (Helper)". This viewer is used to view video images

sent from the camera server.

* Install this software on Windows 95/98, NT 4.0 or Windows 2000. (Note) IE 3.02 or later is required.

Caution