User`s manual

Appendix
139
Error Messages
Message
Problem
Solution
VC-C1 does not respond.
There is no response from the VC-C1 camera.
Check that the camera is switched on. Alternatively, check the RS cable connections on
both the PC and the camera.
Message
Problem
Solution
Camera driver load failed.
Loading of the camera driver failed.
Restart the camera server. If this message recurs after the restart, there may have
been a problem during installation. Re-install the camera server.
Message
Problem
Solution
Invalid camera.
The camera cannot be used.
There is a problem with the camera settings or with the camera itself. Check the server
settings to confirm that the correct camera type is specified. Alternatively, check that the
camera operates normally in remote control operation, etc.
Message
Problem
Solution
Cannot open serial port(<serial port name>).
Error when the COM port was opened.
Check that the serial port used to connect the camera to the PC is functioning normally,
or check the settings from the Windows NT control panel.
Message
Problem
Solution
VCC1 is off line.
The VC-C1 camera connection cannot be set up correctly.
Check that the camera is switched on. Alternatively, check the RS cable connections
on both the PC and the camera.
4. Camera Control Server-specific Event Log Messages