User`s manual

138
Message
Problem
Solution
Your log file is too large. Your log messages will therefore be moved into the back-up
file <file name>.
(Eg. Your log file is too large. Your log messages will therefore be moved into the back-up
file C:\Program Files\Canon\WebView\Sys\log\http.log.bak)
The log file size exceeded 10 MB. The contents of the log are copied to another file,
the log file is cleared and log recording restarts.
The server is operating normally and no action is required.
[Note] The maximum size of the backup log file is 10 MB and the camera server
creates up to 5 log files. Consequently, log backup can occupy up to 50 MB of
disk space. If there is little remaining disk space, consider deleting some of the
backup files.
Message
Problem
Solution
WebView Livescope video capture server can't find video board.
The video capture board cannot be used.
Restart the camera server. If this message recurs after the restart, there may have
been a problem during installation. Check the type of video capture board being used
and re-install the camera server software.
Message
Problem
Solution
WebView Livescope video capture server can't load capture card driver(<module name>).
Loading of the video capture card driver failed.
Restart the camera server. If this message recurs after the restart, there may have
been a problem during installation. Re-install the camera server.
Message
Problem
Solution
WebView Livescope video capture server can't initialize Video capture driver.
An error during video capture driver initialization.
Restart the camera server. If this message recurs after the restart, there may have
been a problem during installation. Re-install the camera server.
Message
Problem
Solution
MIL error on <server name>.
MIL(Meteor Imaging Library) error
Restart the camera server. If this message recurs after the restart, there may have
been a problem during installation. Re-install the camera server.
3. Video Server-specific Event Log Messages